Digital Pregnancy Tests

DOWNLOAD

TEST PROCEDURE

Collect urine in a clean, dry container. Immediately after collection, dip more than half of the absorbent tip into the urine. Caution: Ensure that only the absorbent tip gets wet during sampling, keeping the rest of the test dry.

OR 

Hold the test with the absorbent tip pointing downwards in your urine stream. Caution: Ensure only the absorbent tip gets wet during sampling, keeping the rest of the test dry

The hourglass symbol ⧖ will flash on the display screen. Caution: Do not hold the test with the absorbent tip pointing upwards after adding the sample.

After about ten seconds, you will hear two beeps. Then, remove the test from the urine. Lay the test flat with the display screen facing upward. 

Wait for 5 minutes until you hear another two beeps, then read the results on the display screen.

Positive: Display screen displays +

Negative: Display screen displays -

FREQUENTLY ASKED QUESTIONS

When to collect urine for the test? Any urine specimen is appropriate for pregnancy testing, but the first morning urine specimen is optimal because of its highest concentration of hormone. 

How do I know that the test was performed properly? Under normal conditions, an hourglass symbol “⧖ ” will appear on the display screen after adding the sample. If this symbol does not appear within one minute after adding the sample, it indicates that the test operation was abnormal, and you should retest with a new test. If an open book symbol " 📖 " appears on the display screen, it indicates that the test is invalid. Ensure that you have followed the instructions correctly and retest with a new test.